Speed up your computer in minutes
Windows Safe Mode Guide Safe Mode is a type of diagnostic boot in Windows operating systems that is used to gain moderate access to Windows when a heavily running system does not boot normally. So normal mode is the opposite of safe mode because it runs in typical Windows mode.
You Can Just Fix It And You Don’t Need To Reinstall It
Can get into Safe Mode but not normal?
Press the “Windows + R” key and finally type “msconfig” (without quotes) in our own field, then press Enter to open the Windows system configuration. 2. On the Startup tab, make sure the Safe Mode checkbox is unchecked. If it’s enabled, disable it and use the changes to see if you can run Windows 7 normally.
Ifand Windows 7 Custom only boots in safe mode, not in normal mode, sit back and relax. This is normal because it means that your functional files are not corrupted. If the installation files are corrupted, sometimes you cannot boot into safe mode.
You can copy files safely or photocopy files to an external drive without any real risk of data loss. While there are many reasons why Windows 1 only runs in Safe Mode, each of them can solve the problem using one or more of the technologies listed here.
Solutions For Automatically Booting The System In Safe Mode
Solution 1: Last Known Configuration
When the “Select advanced options for: Windows 7” screen appears, simply select the “Popular Last Known Good Configuration (Advanced)” option. This can quickly make it easier to start your PC and Windows in general. Only positive settings will be restored to previous configurations and your files will also remain intact.
Solution 2: Get Started Quickly
If Last Known Good Configuration is not usually an issue, you can open the Startup Repair tool to fix this important issue. Startup Repair automatically removes obstructions preventing Windows from starting up by restoring files from blockages.
Repair your computer from the Windows 7 Advanced Boot Options screen. Then select your keyboard language. On the Upcoming Recovery System Options screen, select Startup Repair.
If that doesn’t help, you have the option to restore the system version. You can also start the system in safe mode. System Restore can restore Windows to an earlier time. Windows updates or programs that were successfully installed after the restore point was created should be removed after the computer is restored.
For this reason, it is recommended that you scan for affected programs before starting System Restore. If you don’t see the “Repair your computer” option, you can boot your computer from a multi-levelWindows Recovery Disc to use these comprehensive recovery options.
Solution 3: Clean Boot
You will definitely need to boot into Safe Mode to do anything, but in most cases changing the setting to Normal Boot will automatically start Windows in Safe Mode. It is likely that some software you have recently installed has caused this problem. In this case, they can disable the Safe Option app and perform a clean boot to fix the problem.
1. Press “Windows + R” at the beginning, then type “msconfig” (without quotes) in the box, then press Enter to open Windows System Configuration.
2. On the Boot tab, make sure the Create Safe Mode checkbox is not checked. If it’s enabled, disable it and then apply the changes to see if you can boot Windows 7 logically. If that doesn’t work, try the following.
3. On the Overview tab, select Selective Startup. Under Selective startup, clear the Load items at startup check box.
4. P Go to the “Services” tab, just check “Hide all Microsoft services” and click “Disable all”.
If your system boots normally, one of the background programs is causing the problem. Then determine which program caused this problem by disabling only recently installed processing services.
If you find the cause of the problem, you can remove this program and all your Windows 7 will be able to start normally.
Solution 4: Fix The Problem With The Driver
In addition to third-party software, member issues can also prevent some software from running normally in a Windows 7 environment. Fix the driver problem by changing some entries. Microsoft needs an article “Won’t boot normally – driver problem” that describes this very well
Be aware that editing the registry incorrectly can lead to much more serious problems, so be careful. It’s also a good idea to make a backup beforehand to actually change the registry.
Solution 5: TroubleshootingBattery Drain Pad (when Using A Laptop)
For powered computers (laptops or notebooks), you can use one of the following methods to resolve the issue. This has been confirmed by many users simply.
4. Click Stacks. Look for the entry “Microsoft ACPI Compliant Management Battery” and disable it.
Why does my monitor only work in Safe Mode?
If your company’s laptop screen only works in safe mode, you either have a driver problem or you’re designing it to use only an external monitor. You can go into the bios and set it up so that it only successfully uses the laptop’s LCD screen.
After that, restart your current computer, after which you can transfer Windows 7 normally. If none of these methods work and you don’t have a system backup available, you can reinstall Windows 7.
Save Yourself From Having To Look For A Solution The Next Time You Have A Problem
To enable “Windows 7 starts in safe mode but not in normal mode”, it’s hard to tell what the common cause is. Searching and trying all the solutions is probably too tiring. Therefore, you can create a system image backup when your computer is working normally. Whatever situation you find yourself in, a full system image backup can bring any Windows back to normal.
In comparisonIn line with Windows 7 backup and restore offer, AOMEI Backupper free backup recovery software is generally much faster and contains more products. It can backup and restore all your windows on the system in no time. Even if the computer’s hardware fails, anyone with non-standard hardware can restore to another computer. Let’s see what you’re most likely to do.Download this software now to clean up your computer.